Temperature Measurement Solution
Mutiple people Body Temperature Screening System Single people Body Temperature Screening SystemOverview: This article will introduce three methods to add Foscam camera or NVR to VMS.
1. Searching and Adding the camera or NVR in Lan.
a. After logging in the VMS, please click on "Add Device" button.
b. Then please click on "Search" button to find all the cameras or NVRs in Lan and you can choose one of them to input the required username and password to add.
c. You can click on the "Login Check" button to test if the adding is successful or not. If you get a "Login Succeeded" result, please click on "Add" button
and you will see the live video of this camera on VMS.
2. Manually adding by DDNS or IP address.
Please input the required information in below to add your camera manually. If you want to add it by DDNS, please make sure
the camera's or NVR's remote access was set successfully.
3. Manually adding by P2P UID.
Please click on the "P2P connection" box and input the required information to add your camera or NVR to VMS.
Was this article helpful?