Temperature Measurement Solution
Mutiple people Body Temperature Screening System Single people Body Temperature Screening System
Overview: This is a collected FAQ for Foscam WiFi Range Extender WD-R1200U.
Q1: How to confirm the WiFi extender has been configured successfully?
Please focus on the first three lights on the extender. If the first three signal lights turn solid green, this means that you have configured successfully.
If not, please reconfigure one more time.
Q2: Can the extender improve network speed?
No, it can't. All WiFi extender can only increase the distance coverage of your WiFi.
Q3: If the extender frequently loses connection, what can I do?
If your extender's connection is frequently lost, you can reduce the distance between your router and the extender.
Q4: Where is the reset button and how can I reset the extender?
The reset button is on the left side of the extender. Press the Reset and hold this button for more than 8 seconds. The extender will reboot.
Q5: If I can't access the extender’s web management page, what can I do?
1. Please make sure your computer or mobile phone (disable mobile data) is connected to the extender network, not your router network. The extender default SSID is "wifi-5g-XXXX" or "wifi-2.4g-XXXX" (XXXX is the last 4 letters of the MAC address that is labeled on the back of the extender).
2. Please firstly try using Chrome/Firefox/Safari/IE for configuration.
3. Reset the extender and reconfigure one more time.
Q6: The extended signal is strong, but has low speed?
1. We suggest placing the extender about halfway between your router and the devices. The location you choose must also be within the WiFi signal range of your router.
2. If you are too close to your router, please switch to the router's WiFi network (SSID) manually.
Q7: After I configured this extender, how can I login the extender to change the extender's WiFi networrk name(SSID)?
Firstly, please reset your extender. Then you can login the extender as before to configure it with the extender's WiFi network name(SSID) you like.
Was this article helpful?