FAQ

 Port Forwarding on D-link router

Step 1: Open web browser and enter the IP address of your router (192.168.0.1 by default) in address bar. Enter admin for username and then password (blank by default).

Step 2: Click on the Advanced --> Virtual Server.

Enter the following information:
Check the box of Enable.
Enter camera’s port in Service Ports. (eg: 8090)
Enter camera’s IP address in Service IP. (eg: 192.168.1.190)
Click Always in schedule.
Click Apply and then click Restart to save your changes.

You can check port is forwarded successful or not on

http://www.yougetsignal.com/tools/open-ports/