FAQ

 Port Forwarding on Netgear router

Step 1: Open a web browser and enter the IP address of your router (192.168.1.1 by default). Enter username (admin by default) and password (password by default).

Step 2: Click Port Forwarding/Port Triggering. Select Port Forwarding

Select HTTP from the Service Name drop-down list. Click Add Service button.

In the Service Name, type a name, like “camera”
In the Service Type, select TCP/UDP.
In the Starting Port, enter camera’s port number. (eg:8090)
In the Ending Port, enter camera’s port number. (eg:8090)
In the Server IP Address, enter camera’s IP address. (eg:192.168.1.5)
Click Apply. You may need to restart the router for the changes to take effect.

You can check port is forwarded successful or not on

http://www.yougetsignal.com/tools/open-ports/ .